Or should I say without tearing out every hair on your head??? You know that awful wavy, pleaty thing that happens when you hem knit fabrics? Well, I’ve got a simple method for hemming your knit makes that you’ll love and use forever. And, the sun will shine, and birds will sing and your thighs will be thin. Well, maybe not that last part, but this is an awesome, must-have skill sewing friends!
The Problem With Hemming Knits
Knits are my favorite thing to sew, but the hems have always been a mystery. Will they look great or won’t they look great? Will they stretch and wave while I’m hemming or buckle up, growl and sneer? It was just never the calm, wonderful end that I’d like for a project.
The Hero of Our Story
True confession: Knit hems can be grizzly monsters. I’ve been known to leave the hem out of a knit t-shirt and just always tuck it in. No one knew – don’t judge. Until . . . . (can you hear the drumroll?) I went to a Sewing & Stitchery Expo class taught by the amazing Linda Lee of The Sewing Workshop! Are you ready? Here’s the method I now use . . .
The 12 Step Solution to Fabulous Knit Hems
- You’ll Need:
1/4″ Lite Steam-a-Seam 2 Double-Sided Fusible Hem Tape and your knit garment
- Place your ready-to-hem project on your ironing board – single layer with the wrong side up.
- Roll off a length of the Hem Tape about the width of your ironing board. It tears easily, so you won’t need scissors. I find a shorter length much more manageable than rolling off enough for the entire hem.
- One side of your Hem Tape is sticky and the other side is covered in paper. Finger press the sticky side along the cut edge of your project hem.
- Pro Tip 1: Be careful not to have your tape past the cut edge. You don’t want to end up with fusey goo on your ironing board or iron. Keep it a hair’s width inside the cut edge just to be sure. (Yes, fusey goo is a technical term!)
- Pro Tip 2: Although knits do not ravel, I often serge the cut edge of my hem because I just like that finish. If you have serged your edge, you may want to place your hem tape just inside the serged edge. So that it is on the fabric, not the thread. The hem tape does not always play nicely with the thread and you may have trouble with it sticking.
- Carefully peel off the paper and discard it. Your hem will now have sticky tape facing you.
- Turn the hem up to the width that you want and finger press the now fusible hem edge. We’ll make it more permanent in a later step.
- Move your project around your ironing board, so that you are working with a new section of unfused hem. Repeat Steps 3 – 6 and continue until you have fused the whole hem length.
- Turn your project right side out. Try on your top, dress, skirt, or whatever to be sure that you like the length. (If you are absolutely sure that the hem is the right length, then you can skip this step.)
- If the length isn’t what you wanted, go back to the ironing board, undo the hem and make it shorter or longer. You can do this because that magic little hem tape is repositionable!
- When you are sure that your hem is correct, head to your sewing machine and hem your project. If this makes you a little nervous, you can lightly steam the tape to make it more permanent before you stitch the hem. Use a pressing sheet if you want to be super sure about keeping that fusey goo off your iron.
- Now, listen carefully and look around. Birds are singing, the sun is shining, you are smiling and your hem looks fabulous, darling!!
Fusible Hem Tape Love
Linda Lee uses a different brand of hem tape than I do. There are a lot of similar 1/4″ double-sided fusible hem tapes available and you may already have a favorite. Make sure that it is repositionable and very lightweight. Try it on a scrap of knit fabric first, just to be sure it will work for this method.
I really, really love the Lite Steam a Seam 2 Hem Tape made by The Warm Company and I know if works beautifully for knit hems. So, that’s why I’m recommending it for you! I also love the fact that you get two 20 yard rolls of tape in each package for under $5.00.
For the Sewing With Knits class I taught at the Sewing & Stitchery Expo this year, I hemmed all 12 of my clothing pieces with just one of the 20 yard rolls. Unless you sew knits constantly and will go through a lot of it in the next year, one package will probably do. It does have a shelf life, so I recommend just getting one package at a time. Buy Lite Steam a Seam 2 Hem Tape from a locally-owned store if you can. Order it by clicking here, if you can’t.
Okay, you may now leave the room and go hem your knits!! Do you use this method? Or another one? Please share and let me know how it goes!
Moment of Further Truth:
This post includes affiliate links and I may receive a small payment if you make a purchase using that link. Thank you if you do – it helps to keep The Sewful Life stitching along and I sincerely appreciate your support. All opinions are solely and truly mine and I only gush about things I love!